Skip to content

Known Issues and Workarounds in Latest Firmware Release

Applicable to Firmware Version 20260208

The following are bugs known to exist in the latest firmware. The status of the bug in relation to our internal development version is described below.

Items to be resolved in the next release

  • Due to an underlying bug in the web server library we utilize, passwords longer than 21 characters are not fully reported to the code which checks the password for validity. The character count assumes you entered a username of "admin". If you have done this, one workaround for passwords slightly longer than 21 characters is to leave the username blank. This will result in the web server passing 26 characters. If you have entered an even longer password a factory reset will be required to regain access to the unit.

Not fixable in software

  • The port voltage on some Revision H0 5 Channel Power Distribution Units will read much higher than the correct value (at least 30V high). This is the result of some modules in this range being assembled with an extra resistor. This only affects some (not all) of the revision H0 modules with serial numbers between 98304 and 98572. If you have one of these units and the voltage is reading high, and you'd like to fix it to read the correct voltage, please contact us. We can send you instructions on how to remove the errant resistor or can arrange to have the unit sent to us to remove the resistor. This reading is only cosmetic - it does not affect proper operation of the PDU itself.